EPLUS stainless exhaust tip, straight-cut in 51/57/63mm — match the pipe diameter, not the look you like
Images and product details come from third-party platforms and belong to their respective owners. They are shown for reference only.
Affiliate link — we may earn a commission at no extra cost to you.
About this product
The first rule of tip upgrades is matching the inlet to the pipe; styling comes second. This EPLUS straight-cut tip comes in three inlet sizes — 51, 57 and 63mm — covering mainstream car and motorcycle stock piping. Stainless steel handles daily rain, snow and car washes; the straight cut reads sharper than a rolled edge. Before fitting, wipe the pipe end, measure its outer diameter and pick accordingly: the inlet should equal or be slightly smaller than the pipe, clamped tight — one size up means a loose fit. Exhaust noise is regulated in many European countries at inspection; a tip alone without mid/rear-pipe changes is usually fine, but check your local rules.
Product images
Pros & cons
Pros
- Three inlet sizes cover mainstream stock pipe diameters
- Straight-cut looks sharp; stainless weathers well
- Clamp-on fitting, no welding needed
Cons
- Inlet size must be measured on the real pipe; eyeballing invites mistakes
- Some regions restrict exhaust appearance and sound at inspection
